低温燃烧法制备Mn-CeO_x催化剂及其NH_3-SCR脱硝性能

通过低温燃烧法(LCS)制备了不同金属硝酸盐与柠檬酸物质的量比的系列Mn-CeO_x(LCS)锰铈催化剂,将其与共沉淀法(CP)制备的Mn-CeO_x(CP)锰铈催化剂相对比,结合XRD、XPS、FESEM和H2-TPR等技术表征,对其NH_3-SCR脱硝催化性能进行了研究。结果表明,金属硝酸盐与柠檬酸的物质的量比是影响Mn-CeO_x(LCS)催化剂脱硝性能的重要因素。虽然两种催化剂中的锰氧化物组分均为无定型,但相较于Mn-CeO_x(CP),Mn-CeO_x(LCS)表面具有较高的锰含量与Oα/(Oα+Oβ)比,其脱硝催化性能也较高;同时,Mn-CeO_x(LCS)锰铈催化剂上有更多的多级孔,有利于气体在催化剂上的吸附和反应。硝酸盐与柠檬酸物质的量比为36∶22的Mn-CeO_x(LCS)锰铈催化剂在80-180℃下脱硝率可达75%-100%;即使通入SO2,180℃下的脱硝率仍可稳定于74%。     

Deep insights into the hydrolysis of N,N‐dialkylaminoethyl methacrylates in aqueous solution with 1H NMR spectroscopy

N,N‐dialkylaminoethyl methacrylate (DAEA) monomers are extensively used to prepare multi‐responsive polymers. However, these monomers face high risk of hydrolysis in their ester groups when being polymerized in water‐containing medias. Here, NMR spectroscopy was employed to continuously track the hydrolysis and solubility of four widely used DAEA monomers [CH₂CH₂R₁COO(CH₂)₂N(R₂)₂; R₁ = H or CH₃; R₂ = CH₃, CH₂CH₃ or CH(CH₃)₂] under typical polymerization conditions. With this technique, the hydrolysis reactivity and absolute hydrolysis amount of these monomers are separately examined, and then their kinetic correlations with solubility, molecular structure, pH, and temperature are established, so that the hydrolysis of DAEA monomers and even other esters with similar cyclic structure can be predicted. The present efforts are expected to provide a general understanding for the hydrolysis of all the DAEA monomers, benefitting to the optimization of polymerization toward well‐defined DAEA copolymers, as well as the design of smart soft matter for specific applications. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 914–923     

Synthesis and characterization of the novel diamine‐functionalized Fe3O4@SiO2 nanocatalyst and its application for one‐pot three‐component synthesis of chromenes

Fe₃O₄@SiO₂@propyltriethoxysilane@o‐phenylendiamine as an environmentally‐benign functionalized silica‐coated magnetic organometallic nanomaterial has been synthesized and characterized by Fourier transforms infrared (FT‐IR) spectroscopy, scanning electron microscopy (SEM) images and energy dispersive X‐ray (EDX) and vibrating sample magnetometer (VSM) analyses. Then, its catalytic activity was investigated for the one‐pot three‐component condensation reaction between dimedone, malononitrile and various substituted aromatic aldehydes to afford the corresponding 2‐amino‐4H‐chromene derivatives under mild reaction conditions. This nanocatalyst can be easily recovered from the reaction mixture by using a magnet and reused for at least five times without significant decrease in catalytic activity.     

Design of pincer complexes based on (methylsulfanyl)acetic/propionic acid amides with ancillary S‐ and N‐donors as potential catalysts and cytotoxic agents

Pincer complexes featuring readily tunable tridentate ligand frameworks comprise one of the most actively studied classes of organometallic and metal–organic compounds and find extensive use in catalysis, organic synthesis, materials science, and other fields of chemistry and allied disciplines. Currently growing attention is devoted to non‐classical ligand scaffolds, such as functionalized carboxamides, which offer multiple options for directed structural modifications. In this study, the reactions of (methylsulfanyl)acetyl and propanoyl chlorides with 2‐(aminomethyl)pyridine, 2‐(2‐aminoethyl)pyridine, 8‐aminoquinoline and 2‐(diphenylthiophosphoryl)aniline afford a series of new pincer‐type ligands based on functionalized carboxamides. The ligands obtained readily undergo direct cyclopalladation under the action of PdCl₂(NCPh)₂ in dichloromethane at room temperature, resulting in Pd(II) pincer complexes with N,N,S‐ and S,N,S‐donor sets. Importantly, some of the cyclopalladated derivatives can also be produced efficiently under solvent‐free conditions according to the approach recently developed by our group. The complexes obtained have been tested for cytotoxicity against several human cancer cell lines and catalytic activity in the model Suzuki reaction. The results have been compared to those for the related Pd(II) pincer complexes to define the main structure–activity relationships and to outline the most promising structures for further investigations.     

An efficient synthesis and cytotoxic activity of 2‐(4‐chlorophenyl)‐1H–benzo[d]imidazole obtained using a magnetically recyclable Fe3O4 nanocatalyst‐mediated white tea extract

A simple and efficient procedure has been developed for the synthesis of biologically relevant 2‐substituted benzimidazoles through a one‐pot condensation of o‐phenylenediamines with aryl aldehydes catalysed by iron oxide magnetic nanoparticles (Fe₃O₄ MNPs) in short reaction times with excellent yields. In the present study, Fe₃O₄ MNPs synthesized in a green manner using aqueous extract of white tea (Camelia sinensis) (Wt‐Fe₃O₄ MNPs) were applied as a magnetically separable heterogeneous nanocatalyst to synthesize 2‐(4‐chlorophenyl)‐1H–benzo[d]imidazole which has potential application in pharmacology and biological systems. Fourier transform infrared and NMR spectroscopies were used to characterize the 2‐(4‐chlorophenyl)‐1H–benzo[d]imidazole. In vitro cytotoxicity studies on MOLT‐4 cells showed a dose‐dependent toxicity with non‐toxic effect of 2‐(4‐chlorophenyl)‐1H–benzo[d]imidazole, up to a concentration of 0.147 µM. The green synthesized Wt‐Fe₃O₄ MNPs as recyclable nanocatalyst could be used for further research on the synthesis of therapeutic materials, particularly in nanomedicine, to assist in the treatment of cancer.     

Green synthesis and antibacterial effects of aqueous colloidal solutions of silver nanoparticles using clove eugenol

Silver nanoparticles were synthesized using clove extract (CE). Scanning transmission electron microscopy (STEM) revealed the morphology of the metallic Ag nanoparticles obtained via the clove extract synthesis (Ag NPs‐CE), which had a uniform distribution and average sizes varying from 10 nm to 100 nm. Fourier transform infra‐red (FTIR) spectroscopy showed that clove eugenol acts as a capping and reducing agent being adsorbed on the surface of Ag NPs‐CE, enabling their reduction from Ag⁺ and preventing their agglomeration. Formation of the Ag⁰ structure is also confirmed in the FTIR spectrum by the presence in the Ag NPs‐CE sample of the –C=O and –C=C vibrations at wavenumbers 1600 and 2915 cm^‐1, respectively. Antibacterial and antifungal tests using three strains of bacteria and one fungi strain showed that the Ag NPs‐CE performed better compared to pure clove extract (CE) sample.     

Modular synthesis of polymers containing 2,5‐di(thiophenyl)‐N‐arylpyrrole

A modular and facile route has been developed to synthesize functionalized 2,5‐di(thiophen‐2‐yl)‐1‐H‐arylpyrroles from readily available starting materials. These units are compatible with various polymerization conditions and are versatile building blocks for conjugated polymers. The polymers show high thermal stability and solubility in a number of solvents. Characterization of the polymers reveals a correlation between molecular packing, controllable by polymer design, and charge carrier mobility. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1133–1139     

6,6′-Thiobis(methylene)-β-cyclodextrin dimer as a dimeric host and reusable promoter for synthesis of chromenones in water

Herein, two unit of β-cyclodextrin linked by thiomethylene bridge was synthesized and employed as a novel efficient supramolecular host for the synthesis of biologically active chromenones templates via three-component single-pot reaction. A possible reaction mechanism through molecular complexation is suggested based on 2D ROESY NMR spectroscopic analysis. Moreover, the catalyst could be easily recycled, while a 94% yield and 89% rate of catalyst recovery could be achieved after four cycles of catalyst recycling. Environmentally benign reaction conditions, excellent yields, and avoidance of organic solvent and conventional isolation as well as purification are the noteworthy credits of this developed protocol.     

Preparation and characterization of hexamethylenetetramine‐functionalized magnetic nanoparticles and their application as novel catalyst for the synthesis of pyranopyrazole derivatives

A new magnetic catalyst was prepared through the reaction of silanol groups, on the surface of silica‐coated Fe₃O₄ magnetic nanoparticles, with (3‐chloropropyl)triethoxysilane followed by hexamethylenetetramine and chlorosulfonic acid. The obtained magnetic catalyst was characterized using thermogravimetric analysis, vibrating sample magnetometry, scanning electron microscopy and energy‐dispersive X‐ray analysis. Its catalytic activity was investigated in the synthesis of pyranopyrazole compounds, and the results were excellent regarding high yield of the products and short reaction time.     

Dendrimer‐encapsulated Cu(Π) nanoparticles immobilized on superparamagnetic Fe3O4@SiO2 nanoparticles as a novel recyclable catalyst for N‐arylation of nitrogen heterocycles and green synthesis of 5‐substituted 1H‐tetrazoles

In this study, dendrimer‐encapsulated Cu(Π) nanoparticles immobilized on superparamagnetic Fe₃O₄@SiO₂ nanoparticles were prepared via a multistep‐synthesis. Then, the synthesized composite was fully characterized by various techniques such as fourier transform infrared (FT‐IR) spectroscopy, X‐ray diffraction (XRD), dynamic light scattering (DLS), UV‐vis spectroscopy, energy dispersive X‐ray analysis (EDX), thermogravimetric analysis (TGA) and vibration sample magnetometer (VSM). From the information gained by FE‐SEM and TEM studies it can be inferred that the particles are mostly spherical in shape and have an average size of 50 nm. Also, the amount of Cu is determined to be 0.51 mmol/g in the catalyst by inductively coupled plasma (ICP) analyzer. This magnetic nano‐compound has been successfully applied as a highly efficient, magnetically recoverable and stable catalyst for N‐arylation of nitrogen heterocycles with aryl halides (I, Br) and arylboronic acids without using external ligands or additives. The catalyst was also employed in a one‐pot, three‐component reaction for the efficient and green synthesis of 5‐substituted 1H‐tetrazoles using various aldehydes, hydroxylamine hydrochloride and sodium azide in water. The magnetic catalyst can be easily separated by an external magnet bar and is recycled seven times without significant loss of its activity.